Well Pump Motor ONLY Grundfos MS402 1.5HP 3/60/460V 4" 3 Cond + Grd 96465651 NEW

Description

Grundfos MS402 1.5HP 3/60/460V 4" Submersible Motor 3 Cond + Ground 96465651 NEW
Grundfos 4" Submersible Motor MS402 1.5HP 3450 RPM 3/60/460v Stainless Steel
NEW IN OEM BOX; OVERSTOCK INVENTORY REDUCTION SALE!
Make sure your 3/60/460 volt electrical service matches the
3/60/460 volt
motor for this application!
Brand New in original OEM box
Motor Only Number - 79362005  Same as
96465651
Pump speed
3450 rpm
Shaft seal for motor
LIPSEAL
Approvals
CE,EAC
Motor version
T40
shaft end
SPLINE
Motor Leads Included!
Grundfos MS402, 96465651 1.5HP 460V 4" Submersible MS Motor Three Phase, 3 Conductors, 900 lb Max Thrust
Motor
Stainless steel
Motor
DIN W.-Nr. 1.4301
Motor
AISI 304
Motor diameter
4 inch
Maximum liquid temperature
104 °F
Max liquid temperature at 0.15 m/sec
104 °F
Selected liquid temperature
68 °F
Density
62.29 lb/ft³
Motor type
MS402
Applic. motor
GRUNDFOS
Rated power - P2
1.5 HP
Power (P2) reqd pump
1.5 HP
Main frequency
60 Hz
Rated voltage
3 x 460 V
Service factor
1.30
Rated current
3.8 A
Starting current
510 %
Cos phi - power factor
0.72
Rated speed
3450 rpm
Start. method
direct-on-line
Encl class (IEC 34-5)
IP68
Insulation cl (IEC 85)
B
Motor protection
NONE
Thermal protec
external
Built-in temp transmit
No
stainless steel EN 1.4301/AISI 304 for drinking water
Built for 10s-SP Series, 4" Multistage Submersible Well Pump
96465651
UPC: | UNSPSC: 26101107 | GTIN:
Electric Motors > AC Motors
Grundfos Submersible Motor, 3-Wire, 1-1/2 hp, 460 VAC, 3.65 A, 60 Hz, 3 ph, 3450 rpm, Service Factor: 1.3, Thrust Bearing, Insulation Class: Class B, 304 Stainless Steel, 4 in Dia
Features:
Over temperature protection via power cable by means of a built-in tempcon temperature transmitter
Standardized NEMA flange and shaft end
Mechanical shaft seal, ceramic/carbon or Sic/Sic
Completely encapsulated in stainless steel
All surfaces in contact with the liquid are made of stainless steel
Liquid-cooled and has liquid-lubricated bearings
MS 402: Designed for the domestic ground water market and covers outputs up to 2.2 kW (3 hp)
Michell-type thrust bearings with high thrust capacity
Quickly builds up a water film during start-up to ensure high thrust capacity
Can be fitted on all Grundfos SP-A, SP pumps and can be used in the type BM and BMB high pressure booster modules
Specs:
Service Factor: 1.3
Insulation Class: Class B
Phase: 3 ph
Horsepower: 1-1/2 hp
Bearing Type: Thrust
Speed: 3450 rpm
Frequency Rating: 60 Hz
Amperage Rating: 3.65 A
Voltage Rating: 460 VAC
Dimensions: 4 in Dia
Material: 304 Stainless Steel
Type: 3-Wire