-40%

Inline & Shallow Well Jet Pump System - 900 GPH - 120V - 1" - Booster & Tankless

$ 318.85

Availability: 12 in stock
  • Maximum Discharge Head: 150 ft
  • Maximum Suction Lift: 25 ft
  • Volts: 120
  • MPN: PT827
  • All returns accepted: ReturnsNotAccepted
  • Impeller Material: Polymer
  • Country/Region of Manufacture: Canada
  • Flow Rate: 16 gpm
  • Outlet (in): 1"
  • Industrial: Yes
  • Residential: Yes
  • Body Material: Stainless Steel
  • Maximum PSI: 70
  • Self-Priming: No
  • Rated Power: 0.75 hp
  • Inlet (in): 1"
  • Commercial: Yes
  • Condition: New
  • Brand: Pacific Tundra

    Description

    Free Shipping
    within the
    Lower 48 United States
    . If you are located outside of the Lower 48 United States, please request a freight quote.
    Model Number:
    PT827
    Condition:
    New
    Description:
    Shallow Well Jet Pump System - Booster & Tankless - 16 GPM - 120 Volt - 1" Ports
    Description & Specification:
    Used in applications where water pressure is low
    Perfect for increasing and maintaining municipal water pressure
    Alternatively can be dual purposed as a tankless shallow well jet pump.
    Requires NO Pressure Switch or Tank
    User-friendly installation - Requires no hardwiring
    Power Source:
    Electric
    Volts:
    120
    Phase:
    Single
    HP:
    3/4
    GPM:
    16.4
    GPH:
    900
    PSI:
    70
    Maximum Amps:
    15 Start Up - 7.5 Operating
    Watts:
    1,725 Start Up - 828 Operating
    Hertz:
    60 Hz
    Suction Head (ft):
    25
    Total Head (ft):
    150
    Inlet Diameter (in):
    1"
    Outlet Diameter (in):
    1"
    Capacity at 30 PSI @ 5ft:
    900 GPH
    Capacity at 30 PSI @ 10ft:
    749 GPH
    Capacity at 30 PSI @ 15ft:
    638 GPH
    Capacity at 30 PSI @ 20ft:
    555 GPH
    Capacity at 30 PSI @ 25ft:
    472 GPH
    Motor Type:
    TEFC
    Power Cord Length (ft):
    10
    Self-Priming:
    No
    Body Material:
    Stainless Steel
    Impeller Material:
    Polymer
    Requires NO pressure switch
    Requires NO pressure tank
    Please verify that the incoming pressure does not exceed 20 PSI - If pressure exceeds 20 PSI, a pressure reducer must be installed use this system
    Dimensions (L x W x H):
    16" x 10" x 18"
    Weight (lbs):
    20