110V Deep Well Submersible Pump 127ft Head of Delivery Stainless Immersible Pump

Description

Submersible Deep Well water Pump
Deep well is the best  appliance to get water from deep wells. They adopt the most advanced  tehchnology after several years, careful studies made by our  technicians. They are connected with grainless motor and pump. The pumps  have positive and negative formation conductors and other important  parts make a hole body, making them elegant and excellent.
No Plug!!!
This is for clear water only, if water is dirty or muddy, may cause  motor to shut off.
Specifications
:
Input (single  phase）: 110V
Cable:59ft
Outlet diameter： 1 inch outlet
Head of delivery: 128ft
Rated power: 0.5HP/0.37kw
Speed: 2850r/min
Frequency: 50Hz
Characteristics
:
1. Small diameter, light weight, high flux, strong output and  anti-sand quality.
2. Especially our techical innovaton solves the problem  of stabilization of deep well pump quality.
3. Get water from small-diameter wells, farmland mine  wells and family wells.
Applying conditions:
1. Do not make the system in a failure of  dry running condition, it will damage parts and burn motor
2.  Minimum internal diameter of well: 4"(102mm).
3. Pumps cannot be frequent started. Too frequent started will damage the motor
4. Cable should be tied with plastic bags every 4.9-6.6ft (1.5-2 meters)
5. Sulfureted hydrogen percentage is no more than 1.5mg/L
6. Granularity: Max. 0.0079"(0.2mm)
7. Water temperature：Max.40 °C
8. Pumps must be reliable connected with ground. Ground wire must not be  false connected to power , make well charged resulted in danger.
9. Pipeline must be reliable sealed, no leak, otherwise flow can not  meet the requirements.
10. After electric pump is right installated,Wells must be good covered,  to prevent unknown items fall into the well pump.
11.Acid and alkali degree: PH 6.5-8.5
Item  Included:(144009)
1*Submersible Deep Well water Pump
On Apr-29-21 at 01:50:25 PDT, seller added the following information: